Gas safety certificate (CP12) in Andover

Local tips for Andover

Renting in Andover: the local picture

80.2% of Andover households rely on mains gas only for central heating, above the England figure of 74.0%.

Only 1.9% use oil or tank/bottled gas, so most landlord checks here are on mains gas boilers, fires and hobs.

Homes in Andover: 23.7% detached, 27.5% semi-detached, 29.8% terraced and 16.9% purpose-built flats (England: 22.9%, 31.5%, 23.0% and 17.1%).

20.5% of 20,085 households rent from a council or housing association, against 17.1% across England.

Source: ONS Census 2021 (town figures).

Getting to know Andover

Andover is in the Test Valley council area, in the South East. On the council's ward map it takes in Andover Romans, Andover Harroway, Andover St Mary's, Andover Millway, Andover Winton and Andover Downlands wards.

Postcode-wise, Andover spans 3 districts: SO20 (Stockbridge), about 3,309 households; SP10, about 16,638 households; SP11 (Ludgershall, Weyhill, Thruxton and Upper Clatford), about 9,285 households (2011 Census households, via Doogal). The same districts also take in Abbotts Ann, Amport, Appleshaw, Ashley, Barton Stacey, Bossington, Broughton, Charlton, Chilbolton, Chute, Chute Forest, Collingbourne Ducis, Crawley and East Tytherley, so a gas safety engineer covering Andover will often know those streets too.

Living just outside? This page also covers the smaller places nearby: Kentsboro (~6 miles south-west), Chilbolton (~4 miles south), Enham Alamein (~2 miles north), Stockbridge (~7 miles south), Over Wallop (~7 miles south-west), Broughton (~9 miles south-west), Weyhill (~4 miles west), Abbotts Ann (~3 miles south-west), Goodworth Clatford (~3 miles south) and Monxton (~4 miles west).

Next-door postcode districts: SO51 (Romsey); SO40 (Totton); SO52 (North Baddesley); SO22 (Badger Farm); SO21 (Compton); SO23 (City Centre).

Ward by ward, Andover isn't all the same. Of its 6 main wards, private renting is highest in Andover Millway (21% of households) and lowest in Andover Romans (12%). For homes heated by mains gas only, Andover Downlands leads (84%) and Andover St Mary's has the fewest (74%). (ONS Census 2021, output areas summed to 2025 wards inside the town.)

Want more choice? The nearest bigger towns are Basingstoke (~17 miles east) and Southampton (~21 miles south), and Gas Safe registered engineers based there may travel.

How old are the homes? Council tax records put 5% of Andover's homes before 1919 and 30% since 2000 (England: 20% and 18%), so the housing here is newer than the England average. The biggest slice was built between 1973 and 1999 (30%). Whatever its age, every gas appliance and flue you provide is part of the yearly check. (VOA council tax stock, 2025.)

Your corner of Andover

The middle of Andover is in the SP10 postcode district. Source: ONS Postcode Directory, nearest postcode to the built-up area centre.

Nearby towns

Other checks in Andover

What’s involved

Aligns with hub `#guide` teaser; expands visit/prep detail for town pages.

• A Gas Safe registered engineer checks each gas appliance you provide (boiler, hob, fire, water heater) plus relevant flues, ventilation and pipework for safety.
• They look for gas tightness, correct operation, and anything that could cause carbon monoxide or other danger.
• You get a landlord gas safety record (the certificate). One record usually covers all appliances checked that day.
• The engineer should only issue the record once the checks are done. If something’s unsafe, they may disconnect or warn “Danger Do Not Use” — you then arrange remedial work. Keep notes of follow-up work alongside the record.
• LPG counts too. Off the gas grid with bottled or tank LPG? The yearly check still applies if you provide those appliances — book someone who covers LPG.

How long a typical visit takes

Times vary with how many appliances you have and how easy access is. Honest ranges, not guarantees:

• Often 30–60 minutes for a typical flat or small house with one boiler and a hob.
• Allow 45–90 minutes if there’s a gas fire, secondary heater, awkward cupboard, or LPG setup.
• Larger HMOs or multiple boilers take longer — ask when you book.
• Add buffer for parking, meter location, and tenant handover. Same-day digital copies are common; ask how you’ll receive the certificate.

What the landlord must have ready

• Access arranged with the tenant (or vacant possession). Put access rights in the tenancy agreement; don’t force entry.
• Clear path to the boiler, gas meter, cooker and any gas fire — cupboards emptied enough to work safely.
• Appliances switched on and usable (or tell the engineer if something’s isolated).
• Previous gas safety certificate / record if you have one (helps continuity).
• Landlord or agent name and address for the record (you don’t have to sign it, but details must appear).
• Working carbon monoxide alarm where rules require one (nation rules differ — see below).
• If off-grid: note whether it’s LPG so the right engineer is booked.

Tips to prepare

• Book early. You can usually have the check up to two months before the anniversary and keep the original deadline — useful for diary planning. Confirm current HSE guidance when you book.
• Tell tenants in writing the date and why it matters. If access fails, keep a paper trail of attempts (notes through the door, emails, offered rebooks).
• Check CO alarms work before the visit — better than finding a flat battery on the day.
• Don’t block vents or flues; clear laundry and storage from boiler cupboards.
• Between tenancies, confirm appliances left behind, open-ended pipes, or vandalism — HSE advises a fresh check before re-letting if anything looks tampered with.
• Keep records at least two years (longer if you use the early-check flexibility — see HSE). Electronic copies are fine if secure and printable.

How often it’s required

Friendly summary only — not legal advice. Rules can change. Use the official sources linked below before relying on this.

Official sources

Official references (opened / checked 26 Oct 2026) — not a substitute for the full text on those sites.

• GOV.UK — Your landlord’s safety responsibilities
• HSE — Gas safety check records and what to keep
• HSE — Domestic gas FAQs (landlord duties)
• Gas Safe Register
• gov.wales Renting Homes
• mygov.scot landlord repairs
• nidirect health & safety

Common questions

• How long does a landlord gas safety check take?
• How often do landlords need a gas safety certificate?
• What is a CP12 / landlord gas safety record?
• Do I need a gas safety certificate if the property is on LPG?
• When do I give tenants a copy of the gas safety certificate?
• How long should I keep gas safety records?
• What if my tenant won’t let the engineer in?
• Do landlords need a carbon monoxide alarm as well as a gas safety certificate?

Answers sit in the sections above and on the Gas safety (CP12) hub FAQ.

England rules in brief

Within 28 days: give your tenants a copy (new tenants get it before they move in). Keep it: hang on to records for at least 2 years. Also see landlord rules for Andover. Full Gas safety (CP12) rules by nation · Quick guide · GOV.UK.

Frequently asked questions

More questions about gas safety certificates? See the Gas safety (CP12) FAQ.