Mold · Wales
EICR (electrical safety certificate) in Mold
What you need: An electrical installation condition report (EICR) on the wiring, from a qualified electrician, with a copy for the contract-holder.
Also covering: Caerwys, Treuddyn, Gwernymynydd, Gwernaffield-y-Waun, New Brighton, Pantymwyn, Rhosesmor, Rhydymwyn, Cilcain.
How often: Every 5 years: an electrical safety test.
Free to use · No sign-up · Always check their registration before you book · Search another town or postcode
Landlord rules that apply in Mold (Wales)
- Every 5 years: an electrical safety test.
- Copy: give the contract-holder the report.
- Register: with Rent Smart Wales.
- Rent Smart Wales: private landlords must register, and anyone who manages must be licensed. Rent Smart Wales.
- Renting Homes (Wales) Act 2016: most private lets are occupation contracts with a written statement. Guide on GOV.WALES.
Wales-specific summary — not legal advice. Do not apply England-only Renters’ Rights wording here. Full Electrical safety (EICR) rules by nation · Free landlord guides
Request an EICR in Mold
No electrician listed here yet. Tell us what you need and we'll find you a registered electrician, free. Request an EICR
Check they're registered: Electrical Competent Person register · NICEIC contractor search · NAPIT installer search
Local tips for Mold
Own your home? This is for you too.
It's not just for landlords. Homeowners and buyers use these checks for peace of mind too.
Where's this from?
ONS Census 2021, Mold: 67.1% owner-occupiedRenting in Mold: the local picture
13.3% of households in Mold rent privately (below the Wales average of 17.0%), and private lets are covered by periodic electrical inspection rules.
11.4% live in purpose-built flats and 1.0% in converted or shared houses, including bedsits - property types where communal and individual circuits are often both in scope.
Homes in Mold: 35.6% detached, 36.5% semi-detached, 14.0% terraced and 11.4% purpose-built flats (Wales: 28.5%, 32.1%, 26.6% and 9.4%).
Source: ONS Census 2021 (town figures).
| Type | Share | Households |
|---|---|---|
| Mains gas | 82.3% | 3,656 |
| Two or more | 7.4% | 330 |
| Electric | 5.4% | 241 |
| Oil / LPG | 2.8% | 124 |
| Other / none | 2.0% | 91 |
Source: ONS Census 2021 (TS046) — Mold built-up area, Flintshire. OGL v3.
Getting to know Mold
Mold is in the Flintshire council area, Wales. On the council's ward map it takes in Mold South, Mold: Broncoed, Mold West and Mold East wards.
Postcode-wise, Mold sits in 1 district: CH7 (Buckley, Leeswood, Treuddyn and Llanarmon-yn-Ial), about 21,230 households (2011 Census households, via Doogal). The same district also takes in Argoed, Buckley, Caerwys, Cilcain, Connah's Quay, Flint, Gwernaffield with Pantymwyn, Gwernymynydd, Halkyn, Hawarden, Hope, Leeswood and Pontblyddyn, Llanarmon-yn-Ial and Llanferres, so an electrician covering Mold will often know those streets too.
Living just outside? This page also covers the smaller places nearby: Caerwys (~9 miles north-west), Treuddyn (~4 miles south), Gwernymynydd (~1 mile south-west), Gwernaffield-y-Waun (~2 miles west), New Brighton (~1 mile north-east), Pantymwyn (~3 miles west), Rhosesmor (~3 miles north-west), Rhydymwyn (~3 miles north-west) and Cilcain (~4 miles west).
Next-door postcode districts: CH6 (Flint); CH5 (Connah's Quay); CH60 (Gayton); CH4 (Chester); CH64 (Little Neston); CH61 (Barnston).
Ward by ward, Mold isn't all the same. Of its 4 main wards, private renting is highest in Mold: Broncoed (18% of households) and lowest in Mold South (7%). For purpose-built flats, Mold East leads (17%) and Mold South has the fewest (0%). (ONS Census 2021, output areas summed to 2025 wards inside the town.)
Want more choice? The nearest bigger towns are Connah's Quay (~5 miles north-east) and Wrexham (~10 miles south-east), and qualified electricians based there may travel.
How old are the homes? Council tax records put 11% of Mold's homes before 1919 and 17% since 2000 (Wales: 30% and 15%), so the housing here is close to the Wales average. The biggest slice was built between 1945 and 1972 (34%). Newer wiring usually means fewer surprises at the EICR, but the 5-year check still applies. (VOA council tax stock, 2025.)
Coverage around Mold
● Town centre · ● Nearby villages · Chip = postcode district
Also covering: Caerwys · Treuddyn · Gwernymynydd · Gwernaffield-y-Waun · New Brighton · Pantymwyn · Rhosesmor · Rhydymwyn · Cilcain
Schematic coverage for landlords — not a street map. Place names from OS Open Names / ONS (OGL).
Your corner of Mold
The middle of Mold is in the CH7 postcode district (Buckley, Mold post town). Source: ONS Postcode Directory, nearest postcode to the built-up area centre.
Nearby towns
Other checks in Mold
New to EICR in Mold?
First EICR for your Mold let? Here’s what the inspection covers, how long it takes, and how often it’s due — in plain English, with links to check.
An Electrical Installation Condition Report (EICR) is the formal report after a qualified person inspects and tests the fixed electrics in your let — wiring, sockets, lights, consumer unit (fuse box), and permanently connected kit. In plain terms: “Are these electrics safe to keep using?” You’ll also hear “electrical safety certificate” in everyday speech; the document you’re after is usually the EICR (or, for a brand-new install, an Electrical Installation Certificate).
What’s involved
- A qualified person inspects and tests the fixed electrical installation against BS 7671 (Wiring Regulations).
- They look for overload, shock and fire risks, defective work, and weak earthing or bonding.
- You receive a report (usually an EICR) with a satisfactory / unsatisfactory outcome and a next-inspection date.
- Classification codes you’ll see: C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), FI (further investigation). C1/C2/FI generally mean remedial or further work is needed for a satisfactory outcome; C3 alone is recommendation, not usually a fail.
- Scotland also expects PAT / in-service testing of appliances you supply, alongside the installation report.
- Communal corridors in a block are usually outside the PRS EICR rules for your flat — but you still need safe communal electrics under other housing law. Ask your freeholder/managing agent who’s responsible.
How long a typical visit takes
Honest ranges — ask your electrician for a quote timed to your property:
- Often 2–4 hours for a typical 1–2 bed flat with straightforward access to the consumer unit.
- Often 3–6 hours for a 3–4 bed house, older wiring, or more circuits.
- Larger HMOs, multiple consumer units, or solar/battery systems can run longer or need a specialist second visit.
- Power may be off for parts of the test — warn tenants. Remedial work is usually a separate booking.
What the landlord must have ready
- Access to every room, loft (if relevant), and the consumer unit — clear the cupboard; labels help.
- Keys for meter cupboards / communal intake if you hold them.
- The previous EICR (or Electrical Installation Certificate for a rewire) so the next inspector can pick up history.
- List of landlord-supplied appliances (especially in Scotland, where PAT is expected).
- Tenant notice: testing means switching circuits off; agree a window that works for them.
- Any known DIY electrical work, extensions, or EV charger installs — flag them up front.
Tips to prepare
- Make the consumer unit reachable without moving a fridge or climbing over bikes.
- Replace cracked sockets and missing blanking plates before the visit if you can — small fixes often prevent codes.
- Don’t overload extensions as a long-term “solution”; the inspection will notice.
- After the report: diary C1/C2/FI deadlines (often within 28 days in England — confirm). Keep written confirmation of remedial work for tenants and, if asked, the council.
- Visual walk-round between tenancies (scorch marks, loose fittings) — not a substitute for the EICR, but catches obvious issues early.
- Ask which competent person scheme the electrician belongs to, then look them up before they arrive.
How often it’s required
Friendly summary only — not legal advice. Rules can change. Use the official sources linked below before relying on this.
Wales
Fitness of homes for human habitation — landlords · Renting Homes checklist
gov.wales Renting Homes hub
- Fitness for Human Habitation regulations require electrical safety testing at least every 5 years (sooner if the previous report says so). Provide the electrical condition report to the contract-holder (commonly within 14 days of occupation or of the inspection — confirm current FFHH wording).
- Rent Smart Wales registration / licensing still applies to private landlords and agents.
Rules in other UK nations
England
Friendly summary only — not legal advice. Rules differ by nation and can change. Use the official sources linked below.
GOV.UK electrical safety standards guidance
same GOV.UK guidance
- Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 (updated for social housing in 2025), private landlords must have installations inspected and tested by a qualified person at least every 5 years (or sooner if the report says so).
- Give existing tenants a copy within 28 days; new tenants before occupation; prospective tenants within 28 days of a request; local authority within 7 days if requested. Complete required remedial / further investigation within 28 days (or any shorter period on the report).
- A full Electrical Installation Certificate for a new build or complete rewire can cover you for five years in place of an immediate EICR — confirm against the guidance.
Scotland
mygov.scot — landlord repairs · Repairing Standard statutory guidance — electricity
mygov.scot — what to give a tenant
- Under the Repairing Standard, landlords must arrange an electrical safety inspection (periodic inspection and testing of the installation plus in-service testing of landlord-supplied equipment) before first let and then at least every 5 years. An RCD in the main consumer unit is expected.
- Give new tenants the electrical report and PAT report (with other move-in documents). Interlinked smoke and heat alarms have applied since February 2022 — check current alarm rules separately.
Northern Ireland
nidirect — health and safety · legislation.gov.uk NISR 2024/201 · DfC landlord materials
- Electrical installations must be inspected and tested by a qualified person at least every 5 years. The Electrical Safety Standards for Private Tenancies Regulations (Northern Ireland) 2024 set duties for private landlords (report to tenants within 28 days; remedial timelines similar to England). Confirm commencement / application dates for your tenancy type — don’t assume every older tenancy is already in scope without checking.
- Landlord Registration Scheme registration still applies.
Official sources
Official references (opened / checked 26 Oct 2026) — not a substitute for the full text on those sites.
Common questions
- How often does a landlord need an EICR?
- How long does an electrical safety inspection take?
- What is the difference between an EICR and an electrical installation certificate?
- What do C1, C2 and C3 mean on an EICR?
- Do landlords have to give tenants a copy of the EICR?
- Do I need PAT testing as well as an EICR?
- What if the EICR is unsatisfactory?
- Who can carry out a landlord electrical safety inspection?
Answers sit in the sections above and on the Electrical safety (EICR) hub FAQ.
Wales rules in brief
Copy: give the contract-holder the report. Register: with Rent Smart Wales. Also see landlord rules for Mold. Full Electrical safety (EICR) rules by nation · Quick guide · GOV.WALES.
Frequently asked questions
Is renting common in Mold?
Yes, about 13% of households rented privately at the 2021 Census (ONS TS054), so plenty of local landlords need these checks.
Nobody covers my part of Mold yet. Where else can I look?
The nearest other towns we list are Mynydd Isa (~1 mile), Soughton (~2 miles), Buckley (~3 miles), measured straight-line between OS Open Names centres. An electrician based there may travel, so ask.
More questions about EICRs? See the Electrical safety (EICR) FAQ.
Letting in Wales? Free, sourced landlord guides and a certificate renewal tracker →
📊 The numbers behind this page
ONS Census 2021 figures here are for Mold itself (output areas added up to the town's boundary).
Figures in the text above name their source.
- Households with electric-only heating
- 5.4% 1
- Households socially renting
- 18.9% 2
- Usual residents (Census 2021)
- 9,890 3
- ONS Census 2021, TS046
- ONS Census 2021, TS054
- ONS Census 2021
Data sources · updated 26 October 2026