South East · England

EICR (electrical safety certificate) in Alton

What you need: An electrical installation condition report (EICR) on the wiring, from a qualified electrician, with a copy for your tenants.

Also covering: Medstead, Selborne, Bentworth, Upper Froyle, Beech, Upper Farringdon, East Worldham, Lower Farringdon, Lasham.

How often: Every 5 years: an electrical inspection and test by a qualified person.

Free to use · No sign-up · Always check their registration before you book · Search another town or postcode

Landlord rules that apply in Alton (England)

  • Every 5 years: an electrical inspection and test by a qualified person.
  • Within 28 days: give your tenants a copy of the report.
  • If asked: send it to the council within 7 days.
  • Renters’ Rights Act 2025: England-only reforms (assured periodic tenancies from 1 May 2026). Overview on GOV.UK.
  • Local licensing (East Hampshire): mandatory HMO licensing applies (5+ people, 2+ households sharing facilities). Confirm any selective or additional scheme for your postcode with East Hampshire council.

Short local summary — not legal advice. Full Electrical safety (EICR) rules by nation · Free landlord guides · GOV.UK landlord safety responsibilities

Request an EICR in Alton

No electrician listed here yet. Tell us what you need and we'll find you a registered electrician, free. Request an EICR

Check they're registered: Electrical Competent Person register · NICEIC contractor search · NAPIT installer search

Local tips for Alton

🏢

Flats and shared houses

Plenty of Alton homes are flats or converted houses, where the shared hallway lights and circuits matter too. Ask whether the quote covers communal areas.

Where's this from?ONS Census 2021, Alton: 22.3% purpose-built flats, 1.8% converted/shared
🔌

Electric heating is common here

If your heating is electric (storage heaters and the like), mention it when booking, as it can mean more circuits to test.

Where's this from?ONS Census 2021, Alton: 12.0% electric-only heating
🏡

Own your home? This is for you too.

It's not just for landlords. Homeowners and buyers use these checks for peace of mind too.

Where's this from?ONS Census 2021, Alton: 64.0% owner-occupied

Renting in Alton: the local picture

14.8% of households in Alton rent privately (below the England average of 20.5%), and private lets are covered by periodic electrical inspection rules.

22.3% live in purpose-built flats and 1.8% in converted or shared houses, including bedsits - property types where communal and individual circuits are often both in scope.

Homes in Alton: 22.2% detached, 29.7% semi-detached, 21.9% terraced and 22.3% purpose-built flats (England: 22.9%, 31.5%, 23.0% and 17.1%).

Source: ONS Census 2021 (town figures).

In Alton, 76.2% of households use mains gas for central heating; 1.0% use oil or tank or bottled gas.

Source: ONS Census 2021 (TS046) — Alton built-up area, East Hampshire. OGL v3.

Getting to know Alton

Alton is in the East Hampshire council area, in the South East. On the council's ward map it takes in Alton Wooteys, Alton Westbrooke, Alton Amery, Alton Eastbrooke, Alton Ashdell, Alton Whitedown and Alton Holybourne wards.

Postcode-wise, Alton sits in 1 district: GU34 (Beech, Bentworth, Medstead and Four Marks), about 12,338 households (2011 Census households, via Doogal). The same district also takes in Beech, Bentley, Bentworth, Binsted, Chawton, Colemore and Priors Dean, East Meon, East Tisted, Farringdon, Four Marks, Froxfield and Privett, Froyle, Lasham and Medstead, so an electrician covering Alton will often know those streets too.

Living just outside? This page also covers the smaller places nearby: Medstead (~4 miles south-west), Selborne (~4 miles south), Bentworth (~3 miles west), Upper Froyle (~3 miles north-east), Beech (~2 miles south-west), Upper Farringdon (~3 miles south), East Worldham (~2 miles south-east), Lower Farringdon (~3 miles south) and Lasham (~3 miles north-west).

Next-door postcode districts: RG29 (Hook); GU35 (Bordon); GU32 (East Meon); GU33 (Liss); RG25 (Cliddesden); RG27 (Hook).

Ward by ward, Alton isn't all the same. Of its 7 main wards, private renting is highest in Alton Westbrooke (20% of households) and lowest in Alton Whitedown (6%). For purpose-built flats, Alton Westbrooke leads (31%) and Alton Amery has the fewest (9%). (ONS Census 2021, output areas summed to 2025 wards inside the town.)

Want more choice? The nearest bigger towns are Basingstoke (~10 miles north-west) and Fleet (~10 miles north-east), and qualified electricians based there may travel.

How old are the homes? Council tax records put 12% of Alton's homes before 1919 and 24% since 2000 (England: 20% and 18%), so the housing here is newer than the England average. The biggest slice was built between 1945 and 1972 (29%). Newer wiring usually means fewer surprises at the EICR, but the 5-year check still applies. (VOA council tax stock, 2025.)

Coverage around Alton

Schematic coverage map for Alton

● Town centre · ● Nearby villages · Chip = postcode district

Also covering: Medstead · Selborne · Bentworth · Upper Froyle · Beech · Upper Farringdon · East Worldham · Lower Farringdon · Lasham

Schematic coverage for landlords — not a street map. Place names from OS Open Names / ONS (OGL).

Your corner of Alton

The middle of Alton is in the GU34 postcode district. Source: ONS Postcode Directory, nearest postcode to the built-up area centre.

GU34 · Alton

Nearby towns

Holybourne ~1 miFour Marks ~4 miBentley, Hampshire ~5 miBordon ~6 miLindford ~6 mi

Other checks in Alton

Gas safety (CP12)Energy Performance Certificate (EPC)Plumbing & water complianceInventory & check-in reports

New to EICR in Alton?

First EICR for your Alton let? Here’s what the inspection covers, how long it takes, and how often it’s due — in plain English, with links to check.

An Electrical Installation Condition Report (EICR) is the formal report after a qualified person inspects and tests the fixed electrics in your let — wiring, sockets, lights, consumer unit (fuse box), and permanently connected kit. In plain terms: “Are these electrics safe to keep using?” You’ll also hear “electrical safety certificate” in everyday speech; the document you’re after is usually the EICR (or, for a brand-new install, an Electrical Installation Certificate).

What’s involved

Stages of a landlord EICR: inspection and test, report, any remedial work, then copy to the tenant.
  • A qualified person inspects and tests the fixed electrical installation against BS 7671 (Wiring Regulations).
  • They look for overload, shock and fire risks, defective work, and weak earthing or bonding.
  • You receive a report (usually an EICR) with a satisfactory / unsatisfactory outcome and a next-inspection date.
  • Classification codes you’ll see: C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), FI (further investigation). C1/C2/FI generally mean remedial or further work is needed for a satisfactory outcome; C3 alone is recommendation, not usually a fail.
  • Scotland also expects PAT / in-service testing of appliances you supply, alongside the installation report.
  • Communal corridors in a block are usually outside the PRS EICR rules for your flat — but you still need safe communal electrics under other housing law. Ask your freeholder/managing agent who’s responsible.

How long a typical visit takes

Honest ranges — ask your electrician for a quote timed to your property:

  • Often 2–4 hours for a typical 1–2 bed flat with straightforward access to the consumer unit.
  • Often 3–6 hours for a 3–4 bed house, older wiring, or more circuits.
  • Larger HMOs, multiple consumer units, or solar/battery systems can run longer or need a specialist second visit.
  • Power may be off for parts of the test — warn tenants. Remedial work is usually a separate booking.

What the landlord must have ready

  • Access to every room, loft (if relevant), and the consumer unit — clear the cupboard; labels help.
  • Keys for meter cupboards / communal intake if you hold them.
  • The previous EICR (or Electrical Installation Certificate for a rewire) so the next inspector can pick up history.
  • List of landlord-supplied appliances (especially in Scotland, where PAT is expected).
  • Tenant notice: testing means switching circuits off; agree a window that works for them.
  • Any known DIY electrical work, extensions, or EV charger installs — flag them up front.

Tips to prepare

  • Make the consumer unit reachable without moving a fridge or climbing over bikes.
  • Replace cracked sockets and missing blanking plates before the visit if you can — small fixes often prevent codes.
  • Don’t overload extensions as a long-term “solution”; the inspection will notice.
  • After the report: diary C1/C2/FI deadlines (often within 28 days in England — confirm). Keep written confirmation of remedial work for tenants and, if asked, the council.
  • Visual walk-round between tenancies (scorch marks, loose fittings) — not a substitute for the EICR, but catches obvious issues early.
  • Ask which competent person scheme the electrician belongs to, then look them up before they arrive.

How often it’s required

Friendly summary only — not legal advice. Rules can change. Use the official sources linked below before relying on this.

England

Friendly summary only — not legal advice. Rules differ by nation and can change. Use the official sources linked below.

GOV.UK electrical safety standards guidance

same GOV.UK guidance

  • Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 (updated for social housing in 2025), private landlords must have installations inspected and tested by a qualified person at least every 5 years (or sooner if the report says so).
  • Give existing tenants a copy within 28 days; new tenants before occupation; prospective tenants within 28 days of a request; local authority within 7 days if requested. Complete required remedial / further investigation within 28 days (or any shorter period on the report).
  • A full Electrical Installation Certificate for a new build or complete rewire can cover you for five years in place of an immediate EICR — confirm against the guidance.
Rules in other UK nations

Wales

Fitness of homes for human habitation — landlords · Renting Homes checklist

gov.wales Renting Homes hub

  • Fitness for Human Habitation regulations require electrical safety testing at least every 5 years (sooner if the previous report says so). Provide the electrical condition report to the contract-holder (commonly within 14 days of occupation or of the inspection — confirm current FFHH wording).
  • Rent Smart Wales registration / licensing still applies to private landlords and agents.

Scotland

mygov.scot — landlord repairs · Repairing Standard statutory guidance — electricity

mygov.scot — what to give a tenant

  • Under the Repairing Standard, landlords must arrange an electrical safety inspection (periodic inspection and testing of the installation plus in-service testing of landlord-supplied equipment) before first let and then at least every 5 years. An RCD in the main consumer unit is expected.
  • Give new tenants the electrical report and PAT report (with other move-in documents). Interlinked smoke and heat alarms have applied since February 2022 — check current alarm rules separately.

Northern Ireland

nidirect — health and safety · legislation.gov.uk NISR 2024/201 · DfC landlord materials

DfC landlord checklist

  • Electrical installations must be inspected and tested by a qualified person at least every 5 years. The Electrical Safety Standards for Private Tenancies Regulations (Northern Ireland) 2024 set duties for private landlords (report to tenants within 28 days; remedial timelines similar to England). Confirm commencement / application dates for your tenancy type — don’t assume every older tenancy is already in scope without checking.
  • Landlord Registration Scheme registration still applies.

Official sources

Official references (opened / checked 26 Oct 2026) — not a substitute for the full text on those sites.

Common questions

  • How often does a landlord need an EICR?
  • How long does an electrical safety inspection take?
  • What is the difference between an EICR and an electrical installation certificate?
  • What do C1, C2 and C3 mean on an EICR?
  • Do landlords have to give tenants a copy of the EICR?
  • Do I need PAT testing as well as an EICR?
  • What if the EICR is unsatisfactory?
  • Who can carry out a landlord electrical safety inspection?

Answers sit in the sections above and on the Electrical safety (EICR) hub FAQ.

England rules in brief

Within 28 days: give your tenants a copy of the report. If asked: send it to the council within 7 days. Also see landlord rules for Alton. Full Electrical safety (EICR) rules by nation · Quick guide · GOV.UK.

Frequently asked questions

Is renting common in Alton?

Yes, about 15% of households rented privately at the 2021 Census (ONS TS054), so plenty of local landlords need these checks.

Nobody covers my part of Alton yet. Where else can I look?

The nearest other towns we list are Holybourne (~1 mile), Four Marks (~4 miles), Bentley, Hampshire (~5 miles), measured straight-line between OS Open Names centres. An electrician based there may travel, so ask.

More questions about EICRs? See the Electrical safety (EICR) FAQ.

Letting in England? Free, sourced landlord guides and a certificate renewal tracker →

📊 The numbers behind this page

ONS Census 2021 figures here are for Alton itself (output areas added up to the town's boundary).

Figures in the text above name their source.

Households socially renting
19.6% 1
Usual residents (Census 2021)
17,880 2
Homes built before 1919
12.2% 3
  1. ONS Census 2021, TS054
  2. ONS Census 2021
  3. VOA council tax stock 2025 (CTSOP4.1)

Data sources · updated 26 October 2026